 |
| |
|
|
Application: |
Rechargeable battery packs
Lithium cell and battery packs |
| Product Features: |
Low profile, Solid stat |
| Operation Current: |
1.2A~4.2 A |
| Maximum Voltage: |
15V& 30V |
| Temperature Range: |
-40<C to 85<C |
| Agency Recognition: |
UL (E211981)
TÜV (R3-50004084) |
|
| |
|
|
| |
Part
Number |
Fig |
Hold
Current |
Trip
Current |
Rated
Voltage |
Maximum
Current
|
Typical
Power
|
Resistance Tolerance |
|
RMIN |
RMAX |
R1MAX |
| IH,
A |
IT,
A |
VMAX,Vdc |
IMAX,
A |
Pd, W |
ohms |
ohms |
ohms |
| FSR120 |
1 |
1.20 |
2.70 |
15 |
100 |
1.2 |
0.085 |
0.160 |
0.220 |
| FSR120S |
2 |
1.20 |
2.70 |
15 |
100 |
1.2 |
0.085 |
0.160 |
0.220 |
| FSR175 |
1 |
1.75 |
3.80 |
15 |
100 |
1.5 |
0.050 |
0.090 |
0.120 |
| FSR175S |
2 |
1.75 |
3.80 |
15 |
100 |
1.5 |
0.050 |
0.090 |
0.120 |
| FSR200 |
1 |
2.00 |
4.40 |
30 |
100 |
1.9 |
0.030 |
0.060 |
0.100 |
| FSR350 |
1 |
3.50 |
6.30 |
30 |
100 |
2.5 |
0.017 |
0.031 |
0.050 |
| FSR420 |
1 |
4.20 |
7.60 |
30 |
100 |
2.9 |
0.012 |
0.024 |
0.040 |
|
| |
IH=Hold
current-maximum current at which the device will not trip at
23<C still air.
IT=Trip current-minimum current at
which the device will always trip at 23<C still air.
V MAX=Maximum voltage device can
withstand without damage at its rated current.
I MAX= Maximum fault current device can
withstand without damage at rated voltage (V
max).
Pd=Typical power dissipated from device when in the tripped
state in 23<C still air environment.
RMIN=Minimum device resistance at 23<C.
R1MAX=Maximum device resistance at
23<C, 1 hour after tripping .
Physical specifications:
Lead material:0. 13mm nominal thickness, quarter-hard nickel.
Insulating material: Polyester tape. |
|
| |
 |
 |
 |
|
Part
Number
|
Fig |
A
|
B |
C |
D
|
F |
|
Min
|
Max |
Min
|
Max |
Min
|
Max |
Min
|
Max |
Min
|
Max |
| FSR120 |
1 |
19.9 |
22.1 |
4.9 |
5.2 |
0.6 |
1.0 |
5.5 |
7.5 |
3.9 |
4.1 |
| FSR120S |
2 |
19.9 |
22.1 |
4.9 |
5.2 |
0.6 |
1.0 |
5.5 |
7.5 |
3.9 |
4.1 |
| FSR175 |
1 |
20.9 |
23.1 |
4.9 |
5.2 |
0.6 |
1.0 |
4.1 |
5.5 |
3.9 |
4.1 |
| FSR175S |
2 |
20.9 |
23.1 |
4.9 |
5.2 |
0.6 |
1.0 |
4.1 |
5.5 |
3.9 |
4.1 |
| FSR200 |
1 |
21.3 |
23.4 |
10.2 |
11 |
0.5 |
1.1 |
5.0 |
7.6 |
4.8 |
5.4 |
| FSR350 |
1 |
28.4 |
31.8 |
13 |
13.5 |
0.5 |
1.1 |
6.3 |
8.9 |
6.0 |
6.6 |
| FSR420 |
1 |
30.6 |
32.4 |
12.9 |
13.6 |
0.5 |
1.1 |
5.0 |
7.5 |
6.0 |
6.7 |
|
|
| |
 |
| |
|
| |
 |
| |
|
A = FSR120/FSR120S
B = FSR175/FSR175S
C = FSR200
D = FSR350
E = FSR420
|
|
|
| |


|
| |
 |
| |
|
P/N |
Pcs /Bag
|
| FSR120 |
2K
|
| FSR120S |
2K
|
| FSR175 |
2K
|
| FSR175S |
2K
|
|
|
|
P/N |
Pcs /Bag
|
| FSR200 |
2K
|
| FSR350 |
2K
|
| FSR420 |
2K
|
|
|
| |
| Warning: |
- Operation beyond the specified maximum ratings or
improper use may result in damage and possible electrical
arcing and/or flame.
- PPTC device are intended for occasional overcurrent
protection. Application for repeated overcurrent condition
and/or prolonged trip are not anticipated.
- Avoid contact of PPTC device with chemical solvent.
Prolonged contact will damage the device performance.
|
|
|
All the specifications are subject to
change without previous notice.
|