Application: Wide variety of electronic equipment
Product Features: Low resistance, High hold current, Solid state, Radial-leaded product ideal for up to 30V
Operation Current: 900mA~9A
Maximum Voltage: up to 30V
Temperature Range: -40＜C to 85＜C
Agency Recognition: UL(E211981), C-UL(E211981)
TÜV (R3-50004084)
　 　
　
　
Part
Number		 Hold
Current		 Trip
Current		 Max.Time
to Trip
　		 Maximum
Current
　		 Rated
Voltage
　		 Typical
Power
　		 Resistance Tolerance
RMIN R1MAX
IH, A IT, A at 5xIH IMAX, A VMAX,Vdc Pd, W ohms ohms
FRU090-30 0.90 1.80 5.9 40 30 0.6 0.070 0.22
FRU110-30 1.10 2.20 6.6 40 30 0.7 0.050 0.17
FRU135-30 1.35 2.70 7.3 40 30 0.8 0.040 0.13
FRU160-30 1.60 3.20 8.0 40 30 0.9 0.030 0.11
FRU185-30 1.85 3.70 8.7 40 30 1.0 0.030 0.09
FRU250-30 2.50 5.00 10.3 40 30 1.2 0.020 0.07
FRU300-30 3.00 6.00 10.8 40 30 2.0 0.020 0.08
FRU400-30 4.00 8.00 12.7 40 30 2.5 0.010 0.05
FRU500-30 5.00 10.00 14.5 40 30 3.0 0.010 0.05
FRU600-30 6.00 12.00 16.0 40 30 3.5 0.005 0.04
FRU700-30 7.00 14.00 17.5 40 30 3.8 0.005 0.03
FRU800-30 8.00 16.00 18.8 40 30 4.0 0.005 0.02
FRU900-30 9.00 18.00 20.0 40 30 4.2 0.005 0.02
　 IH=Hold current-maximum current at which the device will not trip at 23＜C still air.
IT=Trip current-minimum current at which the device will always trip at 23＜C still air.
V MAX=Maximum voltage device can withstand without damage at its rated current.
I MAX= Maximum fault current device can withstand without damage at rated voltage (V max).
Pd=Typical power dissipated from device when in the tripped state in 23＜C still air environment.
RMIN=Minimum device resistance at 23＜C.
R1MAX=Maximum device resistance at 23＜C, 1 hour after tripping .
Physical specifications:
Lead material: FRU090~FRU250 Tin plated copper, 24 AWG. FRU300~FRU900 Tin plated copper, 20 AWG.
Soldering characteristics: MIL-STD-202, Method 208E.
Insulating coating:Flame retardant epoxy, meet UL-94V-0 requirement.
　
FRU 090-30 ~ FRU 250-30
Lead Size: 24AWG,
Ø 0.51 mm Diameter		 FRU 300-30 ~ FRU 900-30
Lead Size : 20AWG,
Ø 0.81 mm Diameter
Part
Number
A
B
C
D
E
F
Maximum
Maximum
Typical
Minimum
Maximum
Typical
FRU090-30 7.4 12.2 5.1 7.6 3.0 0.9
FRU110-30 7.4 14.2 5.1 7.6 3.0 0.9
FRU135-30 8.9 13.5 5.1 7.6 3.0 0.9
FRU160-30 8.9 15.2 5.1 7.6 3.0 0.9
FRU185-30 10.2 15.7 5.1 7.6 3.0 0.9
FRU250-30 11.4 18.3 5.1 7.6 3.0 0.9
FRU300-30 11.4 17.3 5.1 7.6 3.0 1.2
FRU400-30 14.0 20.1 5.1 7.6 3.0 1.2
FRU500-30 14.0 24.9 10.2 7.6 3.0 1.2
FRU600-30 16.5 24.9 10.2 7.6 3.0 1.2
FRU700-30 19.1 26.7 10.2 7.6 3.0 1.2
FRU800-30 21.6 29.2 10.2 7.6 3.0 1.2
FRU900-30 24.1 29.7 10.2 7.6 3.0 1.2
　
　
　
　

　
A = FRU090-30 B = FRU110-30 C = FRU130-30 D = FRU160-30
E = FRU185-30 F = FRU250-30 G = FRU300-30 H = FRU400-30
I = FRU500-30 J = FRU600-30 K= FRU700-30 L = FRU800-30
M= FRU900-30 　 　 　

　
　

　
　
P/N
Pcs /Bag
Reel/Tape
FRU090-30
500
3K
FRU110-30
500
3K
FRU135-30
300
3K
FRU160-30
300
3K
FRU185-30
300
3K
FRU250-30
300
3K
FRU300-30
200
1.5K
　
P/N
Pcs /Bag
Reel/Tape
FRU400-30
200
1.5k
FRU500-30
200
------
FRU600-30
100
------
FRU700-30
100
------
FRU800-30
100
------
FRU900-30
100
------



　
　
Warning:
  1. Operation beyond the specified maximum ratings or improper use may result in damage and possible electrical arcing and/or flame.
  2. PPTC device are intended for occasional overcurrent protection. Application for repeated overcurrent condition and/or prolonged trip are not anticipated.
  3. Avoid contact of PPTC device with chemical solvent. Prolonged contact will damage the device performance.

All the specifications are subject to change without previous notice.